BPCard™ Blood Pressure Meter Specifications
Weight:
Height WxDxH:
Cuff Size:
Housing:
Program:
Environmental Conditions:
Power Supply:
Measurement Method:
Inflation Method:
Deflation Method:
Deflation Rate:
Rapid Exhaust:
Determination Time:
Pulse Rate Display
Range:
Pulse Accuracy Range:
Measurement Range:
Measurement Accuracy:
Pressure Indicator Accuracy (for pressure changes up to 4 mmHg/second):
Voltage Range:
Pressure Detection:
Signal Inputs:
Alarms:Less than 6 ounces (0.38 lb)
53mm x 140mm x 26mm (2.1” x 5.5” x 1.0”), extended housing.
Adult: 27.0 to 35.0cm (10.6” to 13.8”)
Small Adult: 20.0 to 28.0 cm (7.9” to 11.0”) Large Adult: 34 to 42.0 cm (13.4” to 16.5”)
PCMCIA Type II PC Card with extended housing.
Reporting software is stored on the computer.
Storage Conditions:
Temperature: -20 to 55o C (-4 to 131o F)
Humidity: < 90% (non-condensing)
Operating Conditions:
Temperature: 10 to 40oC (50 to 104o F)
Humidity: 15% to 90%, (non-condensing)
Barometric Pressure: 105kPa - 80Kpa (790mmHg - 600mmHg)
Internal: 5Vdc, less than 80 mA. Supplied by the PCMCIA slot.
Auscultatory
Manual bulb pump
Automatic
User selectable, validated at 2-3 mmHg/sec.
Pressure reduction from 260 mmHg to 15mmHg in10 seconds or less.
12-40 seconds
40-200 bpm
50-115 bpm ±7 bpm
0-260 mmHg.
Pressure ± 3 mmHg
Measurement: For systolic and diastolic pressures, the mean difference of paired measurements of the BPCard and the standard ascultatory measurement method shall be ± 5 mmHg, with a standard deviation of 8 mmHg or less.
For 0-260 mmHg ± 3 mmHg
For >260 mmHg, the indicated pressure is >258 mmHg or indicates an over range error.
The BPCard will perform properly when connected to a laptop or desktop using AC power in the range of 104 Vrms to 127Vrms.
Semi-conductor pressure sensor.
The BPCard receives sub sonic signals from a two channel microphone which is incorporated into the cuff. Only QRS approved microphones may be connected to the BPCard.
Number of microphone input channels: 2
Microphone Preamplifier impedance: 8.2M.
Maximum allowable voltage on preamplifier inputs: ± 16V
None